MEAN WELL LED Driver Wiring Diagram
If you are looking for a MEAN WELL LED driver wiring diagram, we suggest you download the LED Driver Installation Manual using the following link:
MEAN WELL LED Driver Installation Manual
The following instruction manuals also include wiring diagrams:
MEAN WELL LCM-KN KNX LED Driver Instruction Manual
MEAN WELL DL-02 Lighting Controller Instruction Manual
Please note that not every model mentioned in this document has the necessary electrical safety certifications for Australia.
In fact, there are only two series of LED drivers that MEAN WELL has had certified for use in Australia. This is the HLG and ELG series LED drivers.
However, ADM Systems has had more models tested and certified, which in most instances has required a modification to be made to the LED driver during production.
This means that there is an ADM version that can be used in Australia and a standard model that cannot.
For example the PWM-60 series LED drivers. The image below shows both the ADM model and the standard model and the differences in product labelling, so you can identify which is which.
If you cannot see the RCM mark on the LED driver it should not be installed.
Please do not hesiate to contact MEAN WELL Australia if you have any questions about installing MEAN WELL LED drivers, or LED driver approvals.