Need a replacement MEAN WELL Power Supply?

4 May 2017
Replacement MEAN WELL power supply

MEAN WELL power supplies are used all over the world in a wide range of different applications and types of machinery.

One of the key advantages to using a MEAN WELL power supply is its reliability.

However, this can mean that service engineers occasionally come across a model of a MEAN WELL power supply that is no longer readily available.

This is because MEAN WELL are always releasing new power supplies, which offer higher efficiency, higher power density and/or higher reliability, as well as offering a higher level of functionality.

Recently an Australian customer required a MEAN WELL IT-60D multi rail power supply in order to repair a robot.

MEAN WELL replacement power supply

There was no stock of the IT-60D available in Australia.

Although one could have been flown into Australia at a modest cost, a far more cost effective and quicker option was suggested.

After discussing the requirements of the robot with the customer, it was decided that the best option was to buy three single rail power supplies, which were readily available instead at a cost of under $50! This meant that the customer had the robot up and running again in no time at all at very little cost.

If you are struggling to track down a particular model of a MEAN WELL power supply contact MEAN WELL Australia. We will gladly check to see if any of our partners has stock.