25-Watt Constant Current DALI or DALI -2 LED Driver with Selectable Output
LCM-25DA
The MEAN WELL LCM-25DA is an advanced constant current LED driver with selectable output current. The current setting is via a DIP switch under the blue cover.
This LED driver has built-in power factor correction and up to 10 units can be connected in a Master / Slave configuration for synchronous control.
This is a class II device, so the casing doesn't need to be earthed.
There are two models available. One for DALI and one for DALI-2.
The LCM-25DA also boasts a low no-load power consumption.
This LED driver is available with Australian electrical safety approvals through ADM Systems Pty Ltd. The Australian approvals for this LED driver are held by ADM and not MEAN WELL. Therefore, electrical safety certificates and reports can only be issued to customers who have purchased this item from ADM. This is because there is no way of determining if LED drivers purchased from other sources meet the design requirements of the Australian standard.
Images are for reference only, refer to product data sheet
IMPORTANT
MUST BE INSTALLED BY A LICENSED ELECTRICIAN
Models in this series
Output |
Input |
||||
---|---|---|---|---|---|
DC Voltage | Power | Rated Current | Input Efficiency | Input Voltage | |
LCM-25DA (DALI) | 59V | 18.9 ~ 25.2W | 350mA, 450mA, 500mA, 550mA, 600mA, 700mA (default), 800mA, 900mA, 1050mA | 86.00% | 180 ~ 277VAC |
LCM-25DA2 (DALI-2) | 59V | 18.9 ~ 25.2W | 350mA, 450mA, 500mA, 550mA, 600mA, 700mA (default), 800mA, 900mA, 1050mA | 86.00% | 180 ~ 277VAC |