200-Watt IP67 KNX LED Driver with PWM Output
PWM-200-KN
The MEAN WELL PWM-200-KN series of LED drivers have a PWM output for even dimming, regardless of the load on the LED driver. The IP67 rated enclosure provides resistance to dust and moisture ingress. These constant voltage LED drivers can also operate in constant current mode at their maximum current rating. For added efficiency they have built-in power factor correction.
They have a KNX interface for easy integration with a KNX building automation system. Available with an optional factory fitted BST14 connector.
Note: This LED driver does not carry Australian electrical safety approvals. Please contact our office for assistance If you wish to use this LED driver in Australia.
See table below for models in the range.
Images are for reference only, refer to product data sheet
IMPORTANT
MUST BE INSTALLED BY A LICENSED ELECTRICIAN
Models in this series
Output |
Input |
||||
|---|---|---|---|---|---|
| DC Voltage | Power | Rated Current | Input Efficiency | Input Voltage | |
| PWM-200-12KN | 12V | 180W | 15A | 92.00% | 100 ~ 305VAC |
| PWM-200-12KNBST | 12V - BST14 connector | 180W | 15A | 92.00% | 100~305VAC |
| PWM-200-24KN | 24V | 199.2W | 8.3A | 93.00% | 100 ~ 305VAC |
| PWM-200-24KNBST | 24V - BST14 connector | 199.2W | 8.3A | 93.00% | 100~305VAC |
| PWM-200-36KN | 36V | 199.8W | 5.55A | 94.00% | 100~305VAC |
| PWM-200-36KNBST | 36V - BST14 connector | 199.8W | 5.55A | 94.00% | 100~305VAC |
| PWM-200-48KN | 48V | 200W | 4.17A | 94.00% | 100 ~ 305VAC |
| PWM-200-48KNBST | 48V - BST connector | 200W | 4.17A | 94.00% | 100~305VAC |
