60-Watt IP67 Constant Voltage LED Driver
LPF-60
The MEAN WELL LPF-60 series of LED drivers have an IP67 rated enclosure to provide resistance to dust and moisture ingress. These constant voltage LED drivers can also operate in constant current mode at their maximum current rating. For added efficiency they have built-in power factor correction.
Note: Not all models in this series carry Australian electrical safety approvals. Models with a part number including -AUP have a fitted Australian flex & plug and the correct electrical safety certification for Australia.
If you wish to use any of the other models listed in Australia, please contact our office for assistance.
See table below for models in the range.
Images are for reference only, refer to product data sheet
IMPORTANT
MUST BE INSTALLED BY A LICENSED ELECTRICIAN
Models in this series
Output |
Input |
||||
|---|---|---|---|---|---|
| DC Voltage | Power | Rated Current | Input Efficiency | Input Voltage | |
| LPF-60-12 | 12V | 60W | 5A | 86.00% | 90~305VAC |
| LPF-60-12-AUP | 12V | 60W | 5A | 86.00% | 90 ~ 305VAC - Australian flex & plug |
| LPF-60-15 | 15V | 60W | 4A | 86.00% | 90 ~ 305VAC |
| LPF-60-20 | 20V | 60W | 3A | 86.00% | 90 ~ 305VAC |
| LPF-60-24 | 24V | 60W | 2.5A | 86.00% | 90~305VAC |
| LPF-60-24-AUP | 24V | 60W | 2.5A | 86.00% | 90 ~ 305VAC - Australian flex & plug |
| LPF-60-30 | 30V | 60W | 2A | 86.00% | 90 ~ 305VAC |
| LPF-60-36 | 36V | 60.12W | 1.67A | 86.00% | 90 ~ 305VAC |
| LPF-60-42 | 42V | 60.06W | 1.43A | 86.00% | 90 ~ 305VAC |
| LPF-60-48 | 48V | 60W | 1.25A | 86.00% | 90 ~ 305VAC |
| LPF-60-54 | 54V | 60.48W | 1.12A | 86.00% | 90 ~ 305VAC |
